'%3e%3cpolygon%20points='682.95,0%20714,0%20817.95,100%20786.9,100'/%3e%3c/g%3e%3c/g%3e%3cg%20fill='%23EE1C25'%20stroke='%23EE1C25'%20stroke-width='1.2'%20stroke-linejoin='round'%3e%3crect%20x='0'%20y='0'%20width='23'%20height='100'/%3e%3cpolygon%20points='422,0%20533,0%20527.06,17.48%20422,17.48'/%3e%3c/g%3e%3c/svg%3e){kind=small}
HF-1200AutomaticAutomatic V Grooving Machine
- Max. size
- 100–950 mm
- Speed
- 25–50 m/min
Box type 04 · 3 steps
Drawer box (slipcase) — a deep, narrow rigid box, far taller and longer than it is wide, formed from one V-grooved board.
Short answer
A drawer box, also called a slipcase box, is a deep and narrow rigid box: for example 350 mm long and 320 mm high but as little as 35 mm wide, like the slipcase a book slides into. Ordinary wrapping machines cannot make boxes narrower than about 50 mm, so it is made on dedicated machines. The board is V-grooved, formed into shape in one pass, and the paper is then folded in and pressed.
- 01One V-grooved greyboard blank wrapped in cover paper, folded into a deep, narrow box
01 — Process
Three steps, one machine each.
Where a step names a second machine, it is an alternative for the same step.
- 01
Groove the board
HF-1200Automatic V Grooving Machine25–50m/min
- 02
Form the box
HF-320Automatic Drawer Box (Slipcase) Forming Machine
600–1000pcs/hour
- 03
Fold in and press
HF-320AAutomatic Drawer Box Folding Machine
800–1200pcs/hour
0102030405060 pcs/min
HF-320HF-320A
Line output: 600–1000 pcs/hour, set by the HF-320.
02 — Configurations
One way to build the line.
Each bar is a machine’s speed range on the same 0–60 per minute scale. The red bar is the one that limits the line.
CONFIG A
Drawer box line
Grooving, forming and folding in.
- HF-1200Groove the board25–50 m/min
- HF-320Form the box600–1000 pcs/hour
- HF-320AFold in and press800–1200 pcs/hour
Line output
600–1000pcs/hour
Set by the HF-320
03 — Machines used
Machines for this box.
FAQ
What is a drawer box or slipcase box?
A rigid box that is deep and narrow: much taller and longer than it is wide. The HF-320 forms standard sizes from 35 × 35 × 100 mm to 350 × 120 × 320 mm (length × width × height). A width of 35 mm is the practical lower limit.
How fast is a drawer box machine?
The HF-320 forms 600–1000 drawer boxes per hour. The HF-320A, which folds the paper in and presses it, runs 800–1200 pieces per hour.
Can the HF-320A handle boxes narrower than 50 mm?
Yes. It takes boxes from 40 × 40 × 15 mm and is often paired with an older wrapping machine that cannot make boxes narrower than 50 mm.
Enquiry